Your shocks, or spring absorbers, are a key portion of your vehicle’s suspension. As recommended by their title, their purpose is not to absorb shock. They do so much more, and are precious to your means of transportation, as they contribute in ride value, suspension wear, and tire lifespan.
By Expert Writer: Morne Lourens.
Tips for Replacing Shock Absorbers
Checking your shocks should be done if you dive during heavy braking, hit bumps very hard, or the car is leaking shock fluid. Normal driving can also affect the quality of the shock absorbers over time.
You may need a spring compressor to remove the springs on the shock absorbers. The compressor is necessary if the springs are interrelated or integrated. You will need to be careful when doing this as the springs are loaded with high pressure and sudden releasing could be dangerously damaging.
Using a jack stand to lift the car will help you when replacing the parts. You will need to lift the one side of the car at least thirty centimetres off the ground to make the process easier. Similar to changing the tyre, you will need to remove the wheel too. You will be able to see the shock absorbers as they look like springs. This is where you will need to use the spring compressor for safe removal. You will also come across three bolts that will need to be removed using a socket wrench.
Go here for the full post.
Shock absorbers are vital in all cars to safeguard the mechanisms. Dependent on what kind of car you have will decide how much spring the shocks will need.
By Article Creator: Robert Tomashek.
Not knowing when to replace your shocks or what to look for when they fail can keep you from changing them when needed. Knowing the typical signs of failure and a little about how the shocks are mounted on your vehicle can help you to diagnose and repair your shocks – or, at the very least, can make you an informed consumer so that you are not taken advantage of when you need to get your shocks replaced.
Part 1 of 3: The purpose of your shock absorbers
Shock absorbers, much like struts, are designed to control the oscillations or the bounciness of the springs. When you are driving over bumps and dips in the road, the suspension moves up and down. The springs on your vehicle absorb the movement of the suspension. If your vehicle did not have shocks, the springs would start to bounce – and continue to bounce uncontrollably. The design of the shock is to produce a certain amount of resistance to this movement, to control it and to keep it from bouncing more than about two times.
Go in here for the full post.
If you are not happy with changing your shock absorbers yourself, then you ought to hunt for the aid of a qualified mechanic. A qualified mobile mechanic will be pleased to come to your home or office to swap your shocks. And for your body repair needs we at Guanella will take care of it for you.